Axis Axinstall Script - Axis 5570e User Manual

AXIS 5570e/AXIS 5670e User's Manual

AXIS axinstall Script

Integration with the
Host Printer Spooler
Having performed the basic TCP/IP setup procedures as defined
earlier in this manual, you are now able to print in interactive mode
using PROS, LPR, FTP or Reverse Telnet protocols.
However, if you want to integrate the AXIS 5570e/AXIS 5670e with
your host spooler, you can use the Axis automatic installation script
axinstall. This utility software is resident in the print server and can
be downloaded to your host using FTP, so no disks are required. The
axinstall script is also available on www.axis.com
Having completed this operation, the printer connected to the print
server will appear as though it is directly connected to the host
printer spooler.
If you intend to use the print server in a multi-protocol environment,
refer to the chapters pertaining to the respective operating systems
in this manual.
To integrate the AXIS 5570e/AXIS 5670e with the host printer
spooler, you can use the auto installation script axinstall, resident in
the print server. Follow the instructions below to install axinstall
onto your host using FTP:
1. Login to the print server using the command:
ftp <host name>
-or-
ftp <IP address>
2. Enter as user id and
root
3. Download the script using the command:
get axinstall
Log out using the command
Section 9: Setting Up - UNIX
as password.
pass
or depending on your
quit, bye exit
173