Setup Using Iprint - Axis 5570e User Manual

AXIS 5570e/AXIS 5670e User's Manual
Notes:

Setup using iPrint

• The Public Access print servers are immediately available for everyone on the
network
• The Axis Gateway Configuration Utility is an installation and configuration tool
for NDPS printers in the NetWare environment.
The Axis Gateway will appear in NetWare 5.1 and later releases. You can
download the Axis Gateway Configuration Utility for use with earlier versions of
NetWare from www.axis.com.
• To print using TCP/IP, Axis print server firmware 6.1 or later is required. In order
to print using IPX/SPX, Axis print server firmware 5.51 or later is needed.
iPrint is Novell's next generation of printing software that lets users
print to and from all destinations.
A standard Web page displays available printers to the user.
By clicking a printer, the iPrint client is installed (if not installed
previously), the printer's driver is downloaded, and a printer is created
in the user's Printer folder, enabling the user to send documents to
the printer from any application on the desktop.
Before setting up iPrint printers, make sure that you meet all the
iPrint Setup requirements. See the Novell iPrint Administration Guide
for instructions on installing, configuring, and customizing iPrint.
AXIS Print servers can be installed as iPrint printers, either by using
the Novell LPR gateway (LPR on IP) or the AXIS Gateway
Configuration Snap-in for iPrint.
Axis provides two Snap-ins for iPrint:
AXIS LPR Gateway Configuration
•
• AXIS IPP Gateway Configuration
Section 7: Setting Up - NetWare
143