Axis 5570e User Manual page 248

248
Section 14: SNA Gateways
Concentrator gateway,
Concentrator Gateway,
A concentrator gateway typically behaves as a PU (or a few PUs) to
general the host, even though a number of PUs may be available downstream.
If it is an SDLC or channel attached gateway, typically only one SDLC
or sub-channel address will be used. Examples of concentrator
gateways are: IBM Communications Manager/2 (OS/2), Novell
NetWare for SAA (NetWare 3.x), Microsoft SNA Server (Windows NT),
etc.
When an AXIS 5570e/AXIS 5670e is attached to this type of gateway,
you can map the chosen AXIS 5570e/AXIS 5670e LU to any host LU
you like. This way, several print servers may be accessed through the
same gateway.
Pooling LUs may not be used for AXIS 5570e/AXIS 5670e.
This is an outline of the procedure for configuring to a Novell
NetWare NetWare for SAA v 2.0 Server. More information is provided in the
'Suppor't section of www.axis.com
1. Customize the AUTOEXEC and STARTUP files on the server. Add
the LOAD statements for the LAN and WAN cards, the BTRIEVE
database, and the NetWare for SAA 2.0 Gateway
i.e. LOAD COMMEXEC and LOAD NWSAA.
2. Configure the Communication Executive (this and the following
subjects are done on a WorkStation).
3. Configure SNA Network ID. Either change the default value or let
it stay on default.
4. Configure Data Link Adapters. The configuration is done on the
Data Link Adapters Definitions screen by pressing insert for a
new adapter config, then you always enter the Logical adapter
name, Link type, Logical adapter number and Service status.
AXIS 5570e/AXIS 5670e User's Manual