Basic Setup With Axis Netpilot - Axis 5570e User Manual

AXIS 5570e/AXIS 5670e User's Manual

Basic Setup with AXIS NetPilot

Starting the
Installation
Note:
Print Server Name
Environments
NetWare NDS
Install the AXIS NetPilot software on your computer. AXIS NetPilot
runs on any of these Windows platforms; Windows 98 and Windows
NT.
Follow the instructions below to install the AXIS 5570e/AXIS 5670e
with AXIS NetPilot:
1. Start AXIS NetPilot by double-clicking the NetPilot icon, which is
located in the folder where you installed AXIS NetPilot.
2. Locate the AXIS 5570e/AXIS 5670e in the 'New Axis Units' folder.
Select it and click the Install button on the AXIS NetPilot toolbar.
If your network is large, it could take a few seconds before the print
server appears in the folder.
Choose the with Installation Wizard option.The AXIS NetPilot
Installation Wizard guides you through the installation process. The
following options are available:
The number of options varies according to the number of environments you
enable.
The default print server name consists of the characters 'AXIS'
followed by the last six digits of the serial number. If you want to
change the print server name, just type the new name in the available
text field.
Choose which networking environments you want to configure the
AXIS 5570e/AXIS 5670e for, e.g. NetWare, TCP/IP, Windows & OS/2 or
Macintosh. If your network comprises various different platforms, you
can enable any combination of environments.
Place NetWare Print Queues on a specific bindery server, or
alternatively into an NDS Tree.
Section 7: Setting Up - NetWare
149