Axis 5570e User Manual page 78

78
Section 5: Setting Up - IBM Mainframe (zSeries) AXIS 5570e/AXIS 5670e User's Manual
21. Set Default LU type to Printer (LU type 1 or 3).
22. Specify the VTAM LU name prefix. Click OK.
Notes:
• When the LUs are created the default names for the Printer Devices will be
<name prefix> followed by a two digit number starting at the number you
entered in the starting dependent LU number field.
• In the example below, eight LUs are created automatically. The LU names
created will be BRLTST04 through to BRLTST0B. These names must
correspond to the Printer Names you specify for the TN3270E sessions in
the Print Server.
You can now generate a configuration report from NW for SAA. To do
this, simply mark the server icon in the left window and select
Generate Server Configuration Report from the
function menu.
The following table is a summary of a report generated by this
command for the example above.
Profile Name
SNA Network ID:
Peripheral node control point name:
Block ID/PU ID:
Local/Partner SAP for ILUs:
Logical Adapter:
PU Profile:
Adapter Name
Adapter Type:
Terminate peer link if no active APPC sessions:
Logical adapter number:
NWSAA
SEEDB
CPNAME
05D 66204
04
E100B_1
NWSAAPU
E100B_1
LLC 802.2
No
0