Axis 5570e User Manual page 87

AXIS 5570e/AXIS 5670e User's ManualSection 5: Setting Up - IBM Mainframe (zSeries)
Verifying the
communication
Note:
Note:
You can verify the communication between the MVS system and the
AXIS 5570e/AXIS 5670e by pinging the print server from the MVS
system. A successful ping indicates that the MVS system can
communicate with the AXIS 5570e/AXIS 5670e.
From an TSO session, enter the following command:
TSO PING <IP_address>
The IP address is the IP address of the AXIS 5570e/AXIS 5670e.
In JES2, enter the following command from the System Display and
Search Facility (SDSF) menu 6:
ping <IP_address>
The IP address is the IP address of the AXIS 5570e/AXIS 5670e.
Here is an example of a successful ping:
EZA0458I Ping V3R1:
(Use ATTN to interrupt.)
EZA0463I PING: Ping #1 response took 0.055 seconds
Successes so far = 1
And here is an example of an unsuccessful ping:
EZA0458I Ping V3R1:
(Use ATTN to interrupt.)
EZA0464I PING: Ping #1 timed out
If the ping is not successful make sure the AXIS 5570e/AXIS 5670e is
configured according to the instructions in Setting the IP address,
on page 24 and in Configuring the AXIS 5570e/AXIS 5670e, on
page 71. If these items are all in order, consult your TCP/IP network
administrator.
Pinging host 10.50.45.200
Pinging host 10.50.45.200
87