AXIS 5600+ User's Manual
Basic Queue-based printing over IP
Installing the
AXIS 5600+
Axis print servers with software version 6.0 or later allow users to
print in a Pure IP environment using traditional queue-based printing
(which usually uses the IPX transport protocol). Note that only NDS
queue-based printing is supported.
In the NetWare Pure IP environment, you must use the NetWare
Administrator to create the printer, print server and queue objects.
Follow the instructions below to install the AXIS 5600+ in the
NetWare Pure IP environment:
1. Start the Configuration Wizard from the User mode in the AXIS
5600+ Web interface.
2. Click your way through the Wizard until reaching the NetWare
page.
3. Set the parameters on the NetWare page:
• PSERVER NDS Tree (example: NW5TREE)
or
PSERVER NDS File Server: (example: FILESERVERNAME)
• PSERVER NDS Distinguished Name:
(example: AXISXXXXXX.<context>, where <context> is the
container where you want to create your print server)
87