Axis 5570e User Manual page 197

AXIS 5570e/AXIS 5670e User's Manual
Viewing
the Status file
Performing resets
Printing Hexdumps
Section 10: Management and Configuration
The status command shows which printer port the logical printers are
assigned to, and their current status.
Follow the instructions below to view the status file using telnet:
1. Log in to the AXIS 5570e/AXIS 5670e by typing:
telnet <host name>
window (Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
and .)
pass
3. View the status file by typing:
status
Three types of reset commands allow you to perform soft resets, to
perform hard resets, and to reset the print server's parameters to its
default settings.
Follow the instructions below to perform a soft reset using telnet:
1. Log in to the AXIS 5570e/AXIS 5670e by typing:
telnet <host name>
window (Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
and .)
pass
3. Restart the print server's protocols by typing:
softreset
Replace the command in step 3 above with
to perform the other two reset operations.
The AXIS 5570e/AXIS 5670e allows you to record a trace of the
communication between the AXIS 5570e/AXIS 5670e and the host.
The AXIS 5570e/AXIS 5670e supports hexdump printing for the SNA,
TN3270E, TN5250E, LPR/LPD and Raw TCP/IP printing protocols.
Please refer to Product Model Summary, on page 9 for details on the
supported protocols.
or
telnet <IP address>
or
telnet <IP address>
hardreset
197
in a DOS
root
in a DOS
root
or
default