Axis 5570e User Manual page 287

AXIS 5570e/AXIS 5670e User's Manual
Copier Hole Punch
Copier Paper Source
Copier Copies
Note:
Left 2 i.e. two staples on the left hand side of the document.
•
Center 2 i.e. two staples set in the center of the page. This option
•
is intended for documents printed in A3 format. The staples are
placed in the center of the page where the document is to be
folded. Please refer to the documentation of your digital copier
for more information on these features.
The AXIS 5470e supports hole punching with the following options:
Off i.e. the hole punching option is not activated (default).
•
Long-edge i.e. the left hand side of the document.
•
Short-edge i.e. the top of the document.
•
Enter the desired input bin i.e. paper tray on your digital copier
Enter how many collated (sorted) copies you wish to print in the
Copies field.
If you experience problems with this functionality the Digital Copier printing
options may have been set inconsistently. Please check your configuration
settings and try again.
Section 20: Digital Copier Support
287