Upgrading The Firmware - Axis 5570e User Manual

236
Section 12: Upgrading the Firmware
Section 12

Upgrading the Firmware

Upgrading from the
Print Server's Internal
Web Pages
Upgrading using
AXIS ThinWizard
Upgrading the Firmware
You can upgrade the AXIS 5570e/AXIS 5670e firmware using one of
the following methods:
• AXIS ThinWizard (TCP/IP)
• From the print server's internal Web pages (TCP/IP)
• FTP (TCP/IP)
Note:
Updating instructions are supplied with the firmware release notes.
Follow these instructions to upgrade the firmware of your print server
from its internal Web pages (flash loading over the Web):
1. Open your Web browser, enter the IP address of your print server
and press Enter. (See Print Server Management, on page 85 for
detailed instructions on accessing your Axis print server on the
Web).
2. From the Admin mode, click the Firmware Upgrade button. From
here you can upgrade your print server with the latest available
firmware.
AXIS ThinWizard 3.0 is a tool that enables batch upgrading of several
print servers and can be used for upgrading the print server's
firmware in TCP/IP networks.
You must assign an IP address to the print server, as described earlier
in this manual, before you can use this upgrading method.
Follow the instructions below to upgrade your print servers using
AXIS ThinWizard:
AXIS 5570e/AXIS 5670e User's Manual