Axis 5570e User Manual page 274

274
Section 18: IPDS Overview
Loaded Font
Smoothing
PostScript Error
Optimize Overlays
Memory Kb
PostScript
PostScript
output bin settings
A downloaded 240 dpi font may appear jagged when printed on a
300 dpi printer. The AXIS 5570e/AXIS 5670e uses a font smoothing
feature to enhance the appearance of these fonts. The font
smoothing may be disabled if you want to speed up the font loading
or if your printer has insufficient PostScript virtual memory.
Loaded font smoothing is Enabled by default.
Note:
Font smoothing is optimized for printers with 300 dpi resolution. If your printer
has a resolution of 600 dpi or higher, the smoothing effect will be less significant.
In these cases we recommend that you disable the font smoothing to avoid
reduction in the performance.
Use this parameter to download a PostScript Error Handler to the
Handler printer at power on. Once downloaded, the Error Handler will print an
error message if a PostScript error occurs.
The Error Handler is Disabled by default.
Enabling this parameter will activate an overlay optimization feature
resulting in faster throughput when using host downloaded overlays.
Enabling this feature will require more free Postscript Virtual Memory
in the printer.
Virtual This value defines how much memory the AXIS 5570e/AXIS 5670e
can use in the PostScript printer for storing resources.
The default value is 2000 kbytes.
Map each PostScript bin (1-5) to a bin number or choose Default.
Enter the desired values in the Horizontal scale factor, Vertical scale
bin 1-5
factor, Horizontal offset and Vertical offset fields.
These parameters are for mapping the IPDS bin numbers to the bin
numbers of the connected postscript printer.
AXIS 5570e/AXIS 5670e User's Manual