Adding Netbios/Netbeui Printers In Windows 2000 Using Axis Print Monitor - Axis 5500 User Manual

Adding Printers in Windows
Client/Server Printing
Important!
Alternative Method for
LPR Printing

Adding NetBIOS/NetBEUI Printers in Windows 2000 using AXIS Print Monitor

28
Ports available
AXIS 5500
AXIS 5550
End the wizard in the usual manner: select Manufacturer and
Printer, keep/replace driver, name the printer, make it default or not,
share it or not and finally decide whether you want to print a test
page.
• Network printer - If your print server has already been installed by
the administrator on another computer, select Network printer and
click Next. Follow the instructions in the Add Printer Wizard to
complete the installation.
• Make sure that the Automatically detect and install my Plug and Play printer checkbox
is not checked
• Press F1 to access the Windows online help system if you need additional help when
installing a printer/print server using this method.
If you wish to print over LPR but do not wish to install Print Services for Unix
you can do this by changing the printing protocol after having installed the
printer using the Standard TCP/IP method, see "Adding Printers in Windows
2000 and XP over TCP/IP" on page 25 for instructions.
Once the printer is installed, follow these instructions to change the printing
protocol:
1. Go to Start | Settings | Printers.
2. Double-click the installed printer.
3. Select Properties from the Printer menu.
4. Click the Ports tab.
5. Click the Configure Port button.
6. Click the LPR radio button and enter the queue name (PR1, PR2...).
7. Click OK to finish.
See to it that the NetBEUI protocol is installed on your client. Follow the
procedure below to install Axis Printer Ports from a Windows 2000
workstation:
USB port Parallel port
USB1 —
USB1 LPT1
AXIS 5500 / AXIS 5550 User's Manual