Adding Netbios/Netbeui Printers In Windows 2000 Using Axis Print Monitor - Axis 5400+ User Manual

Adding Printers in Windows

Adding NetBIOS/NetBEUI Printers in Windows 2000 using AXIS Print Monitor

Note:
30
See to it that the NetBEUI protocol is installed on your client. Follow the
procedure below to install Axis Printer Ports from a Windows 2000
workstation:
1. To start the Add Printer Wizard, select Settings | Printers
menu and double-click the Add Printer
clicking Next Next.
Next Next
2. The Wizard asks you to select Local printer
printer printer printer printer. Click Next Next Next. Next
3. Click Create a new port. Create a new port. Create a new port. In the Available Ports dialog, select AXIS Port Create a new port.
click Next Next Next. Next
4. Select NetBIOS/NetBEUI NetBIOS/NetBEUI NetBIOS/NetBEUI as your choice of network protocol and click OK NetBIOS/NetBEUI
5. Select the AXIS Port you want to add from the list of available ports. The
port appears as <name>.<port> (Example: AX100086.LP1). The <port> is
taken from the table below. Click OK
Ports available
AXIS 5400+
AXIS 5600+
6. Choose the appropriate printer driver for your printer. Click Next
proceed directly to step 9. It is only necessary to perform steps 7 - 8 if your
printer does not appear in the list.
Even if the desired printer is available in the Manufacturers and Printers
lists, you are advised to use the printer driver provided with the printer. This
assures you of the latest driver software.
7. Click the Have Disk... Have Disk... button. Insert the printer driver diskette/CD that was
Have Disk... Have Disk...
provided with your printer, select the appropriate diskette/CD drive and click
OK. OK
OK OK
8. Select the printer driver you want to install and click Next
9. Enter an appropriate name for your printer and click Next
10. Choose whether you want to share the printer with other network users and
click Next Next.
Next Next
11. Choose whether you want to print a test page, click Next
Settings | Printers from the Start
Settings | Printers Settings | Printers
Add Printer icon. Start the installation by
Add Printer Add Printer
Local printer or Network printer Local printer Local printer Network printer Network printer Network printer. Select Local
OK OK. OK
Parallel port 1 Parallel port 2
LP1 —
LP1 LP2
AXIS 5400+ / AXIS 5600+ User's Manual
Start
Start Start
Local Local Local
AXIS Port and AXIS Port AXIS Port
OK OK. OK
Serial port
—
CM1
Next Next and Next
Next.
Next Next
Next.
Next Next
Next and then Finish Finish.
Next Next Finish Finish