Sensor Foot Pressure - Husqvarna Designer Diamond User Manual

EXCLUSIVE SENSOR SYSTEM™
feature - Sensor Foot Pressure
Thanks to the Sensor Foot Pressure, the machine actually
senses the thickness of the fabric, embroidery or stitching
to sew over it smoothly and evenly with perfect, even
fabric feed.
Go to the Stitch Settings to see the actual setting of the
Sensor Foot Pressure for the selected fabric and to adjust
the Sensor Foot Pressure.
Raise and lower the presser foot
The Sensor Foot Up and Extra Lift raises the presser foot.
The Sensor Foot Down and Pivot lowers the presser foot.
To lower the presser foot, place the fabric under the
presser foot and press the Sensor Foot Down and Pivot
button or step on the foot control. To raise the presser
foot, press the Sensor Foot Up and Extra Lift or press the
Selective Thread Cutter to cut needle and bobbin thread
and raise the foot. When the needle stops in the down
position, the presser foot raises to pivot position.
You can also lower the presser foot and the needle with
your foot control. If you tap your foot control once you
will lower the presser foot. If you tap the foot control
twice the needle will be lowered into the fabric.
Note: With Needle Stop Down selected: when you stop sewing and
touch Sensor Foot Up the foot will raise but the needle stays in the
fabric. Touch Sensor Foot Up again to raise the needle.
Sewing
Sensor Foot Presssure
Selective Thread Cutter
Sensor Foot Up and Extra Lift
Sensor Foot Down and Pivot
4:9 4:9