Husqvarna Designer Diamond User Manual page 10

Edging Foot J
Quilter's 1/4" Piecing
foot P
Embroidery/Darning
Foot R
7
Side Motion Foot S
7
Decorative Stitch
Foot B Transparent
7
Sensor One-Step
Buttonhole Foot
Self-Adhesive Glide
Plates
1:10
Getting to know your machine
This foot is used for overcasting and seam/overcasting, with
stitches that have a stitch width of 5.0 and 5.5 mm. Stitches form
over the pin which prevents puckering at the edge of the fabric.
This foot is used when piecing quilt blocks. The foot has distance
guidelines marks 1/4" (6 mm) and 1/8" (3 mm) from the needle.
This foot is used for free motion embroidery/quilting/stitching
and hoop embroidery.
This foot is used for side-motion/Omnimotion stitches.
A clear foot for decorative sewing ma kes it easy to match stitches.
Same tunnel on the underside as Presser Foot B.
Plug into the machine then enter the desired buttonhole length to
sew Sensor One-Step Buttonholes. The middle mark measures a
5/8" (15 mm) from fabric edge.
Used for Presser Foot C/Sensor One-Step Buttonhole Foot when
sewing buttonholes on plastic-coated fabrics, leather, etc.