Table of Contents
Advertisement
Design Positioning
Touch the Design Positioning icon to open the Design
Positioning screen. Design Positioning allows you to place
a design on an exact location on your fabric. It is also used
when you want to embroider a design next to a previously
embroidered design.
Note: If you just want to move your embroidery in Embroidery
Stitch-Out, open the Design Positioning window and move your design
using the Control or your stylus.
Use Zoom and Pan to be sure that you are placing the
design exactly where you want it. Fine tune with the arrows
in the Control.
Zoom to Cursor
Maximizes the zoom and pans the embroidery area so the
cursor position is centered on the screen.
Corner Check and Center Check
Corner check can be used to trace the design eld by
touching each of the four corner icons. You can nd the
center of the design by touching the Move to Center icon.
Embroidery Stitch-Out
Design
Positioning
Wizard
Corner Check
Corner Check
Center Check
Corner Check
Corner Check
Design Positioning
Zoom to
Control
Cursor
8:3
Advertisement
Table of Contents
