Advanced Selection; Selection Modes; Add/Remove Selection - Husqvarna Designer Diamond User Manual

Table of Contents

Advertisement

Selection Modes

There are three different ways a design can be chosen on
the screen. This gives you the opportunity to select a subset
of the loaded designs and apply changes only to those
designs.
1.
Selected design (1) - The design is marked with a solid
red line. You can make changes to the design(s). You
can scale, rotate, make the design(s) into a shape, resize
and edit the selected design.
2.
Marked and Selected - The design is marked with a
dotted red line. You are able to make changes to the
marked and selected design. You can remove this
design from the selected designs by pressing the Add/
Remove Selection icon.
3.
Marked design - When two or more designs are on
your screen, you are able to mark a design. The design
is marked by a dotted black line.
It will not be affected by changes such as scale and
rotation. When you select the Add/Remove Selections
icon, the black dotted box turns red. Your design is
now marked and selected.

Advanced selection

Add/Remove Selection

If you have loaded several designs and want to change only
a few of them, you can use the Add/Remove Selection
function. Touch the Add/Remove Selection icon to activate
the function. Mark the designs by touching them to add
them to the selection.
You can also use this function after the Select All function
to remove one or several designs from a group. Then mark
the designs you want to remove and click on Add/Remove
Selection to remove them from the selection.
Group/Ungroup
If you have selected two or more designs and want to
connect them to be adjusted as one design, touch the
Group/Ungroup icon. A red square will surround all
designs in that group. To ungroup, touch the Group/
Ungroup icon again. They will once again become
individual designs.
7:14
Embroidery Edit
1
2
3
Selected Design(s) have a red box
around them.
Marked and Selected Design(s) have a
red dotted box around them.
A black dotted box around a design
means it is marked and not active.
Step Through
Designs
Select All
Add/Remove
Selection
Group/
Ungroup

Advertisement

Table of Contents
loading

This manual is also suitable for:

Viking designer diamond

Table of Contents