Touch Functions - Husqvarna Designer Diamond User Manual

Touch functions

A selected design has a red box around it. To select a design
touch it on the screen. You can use your stylus to make
adjustments directly on screen by touching and dragging
in the embroidery eld. You can Pan, Position, Rotate and
Scale, depending on which touch function is active. You
can also use the arrows in the Control to ne tune.
Position
When Position is active, you can move the selected
design(s) anywhere in the embroidery eld. The numbers
above the Control show, in millimeters, the designs current
horizontal and vertical position from the center of the
hoop.
Touch the Control Center icon and the design(s) will be
moved to the center of the hoop.
Scale
When Scale is active, you can increase or decrease the
selected design or a group of designs by 20%. By default,
the proportions are locked. This is indicated with a closed
padlock in the Control Center icon. To unlock, just touch
the padlock. Height and width can now be changed
individually.
If you move the stylus on the screen towards the center of
the selected design(s), the size will decrease. If you move
the stylus from the center of the selected design(s), the size
will increase. Use the Control to ne tune.
Note: To increase or decrease a design more than 20%, use the Resize
function.
Pan
When Pan is active, you can pan the embroidery eld in the
zoomed view.
Rotate
When Rotate is active, the selected design(s) will be rotated
around the center point of the selected design(s).
Use the arrows in the Control to rotate the design(s) in one
degree increments. Each touch of the Control Center icon
will rotate the design(s) 90 degrees clockwise.
Above the Control you can see the angle in degrees that the
design(s) has rotated from its original position.
7:4
Embroidery Edit
Rotate
Pan
Scale
Position
Control
Control
Center