To Program In Sewing Mode; To Program In Embroidery Edit - Husqvarna Designer Diamond User Manual

To program in Sewing Mode

• Enter the Program window, touch the PROG icon.
• Touch the Stitch or Font Menu to open the stitch or a
font you wish to use.
• The active position is marked by a cursor and the
selected stitch or letter will be marked in red. Inserted
stitches will be placed at the cursor. Only the selected
stitch can be adjusted. Move the cursor through the
stitch program using the scroll.
• To close the Program window and sew your
programmed stitch, touch the OK icon or just press
the foot control.

To program in Embroidery Edit

• To enter the Program mode in Embroidery Edit,
touch the Start Menu icon to foldout the Extended
toolbar.
• Touch the Stitch or Font Menu to open stitch menu or
a font you wish to use.
• The active position is marked by a cursor and the
selected stitch or letter will be marked in red. Inserted
stitches will be placed at the cursor. Only the selected
stitch can be adjusted. Move the cursor through the
stitch program using the arrows.
• To close the Program window and embroider your
Stitch program, touch the OK icon.
To edit a programmed stitch in Embroidery Edit
If you want to edit an already programmed stitch select
the stitch and touch the Edit Stitch Program icon and you
will enter the Program window again.
Program
Stitch Menu
Start Menu
Design Menu
Font Menu
Stitch Menu
Edit Stitch Program
Font Menu
SET Menu
File Manager
EMBROIDERY ADVISOR™
Information
5:3 5:3