Adjustments; Move To Hoop - Husqvarna Designer Diamond User Manual

Adjustments

Move to Hoop

Touch Move to Hoop to move any design that is outside
the hoop area into the hoop area. The design will be placed
at the outer most edge of the hoop.
Park Position
Touch the Park Position icon to move the embroidery arm
to Park Position for storing the embroidery unit.
The hoop must be removed. Move to Park Position.
Mirror Side-to-Side and End-to-End
To mirror a design horizontally, touch the Mirror Side-to-
Side icon. To mirror vertically, touch the Mirror End-to-
End icon.
Delete
When you touch the Delete icon, the selected design(s)
will be deleted from the embroidery eld. If more than
one design is selected, a pop-up message will ask you to
con rm the deletion.
Touch & Hold the Delete icon to delete all the designs in
the embroidery eld. A pop-up message to con rm the
delete all designs will appear.
Duplicate
Touch the Duplicate icon to make a copy of the selected
design(s).
If you want more than one copy, Touch & Hold the icon
and a pop-up message will open where you can enter the
desired number of copies.
See page 7:13-7:15 for information about selecting and
deselecting designs.
7:12
Embroidery Edit
Duplicate
Delete
Mirror End-
to-End
Mirror
Side-to-Side
Park
Position
Move to
Hoop