Baste In Hoop; Move Hoop; Current Stitch Position; Trim Position - Husqvarna Designer Diamond User Manual

Baste in Hoop

Basting enables you to secure your fabric to a hooped
stabilizer. It is especially useful when the fabric to be
embroidered cannot be hooped. Basting provides support
for stretchy fabrics.
Touch the Baste in hoop icon to add a basting stitch
around the design. Touch and hold to open the embroidery
basting window.
Baste around design
Select Baste around design to add a basting stitch around
the design, outlining the area where the design will be
placed on the fabric.
Baste around hoop area
Select Baste around hoop area to add a basting stitch
around the inside edge of the hoop.
You can select both basting options to add additional hold
for certain fabrics and techniques.
Note: The baste stitches will be added in the color block list, with the
possibility to step stitch by stitch and step in and out of the baste color
block/s. The baste color block/s will disappear from the color block
list when stitched out.
Note: Basting can only be enabled when positioned at the rst stitch in
the embroidery.
Note: Touch the FIX button on your machine to activate or deactivate
the selected basting techniques.

Move Hoop

Use the Move Hoop functions to move the embroidery
arm to different positions.

Current Stitch Position

When you want to return to the current stitch position
and continue embroidering where the embroidery was
interrupted, touch the Current Stitch Position icon. You
can also press the Start/Stop button once to return to the
current stitch position and start to embroider.
Park Position
When you have nished your embroidery, remove the
hoop and select Park Position. The embroidery arm will be
placed in the correct position for storage.
Use the Park Position when you want to move the
embroidery arm out of the way for sewing.
Note: It is important that the hoop is removed before selecting Park
Position to prevent damage.

Bobbin Position

To make it easier to change the bobbin, touch Bobbin
Position. The hoop will move away from you, allowing you
to open the bobbin cover and replace the bobbin.
8:6
Embroidery Stitch-Out
Note: You can also touch the Stitch-ReStart button on our machine to
move the hoop to bobbin access position.

Trim Position

Trim Position will move the hoop towards you making
it easier to trim your jump stitches and trim fabric for
specialty techniques.
Note: You can also use touch the Needle Up/Down button on your
machine to move the hoop to trim position.

Center Position

Use the Center Position if you want to check where the
center position of the design will be placed on the fabric.