Programmable Button Sew On - Husqvarna Designer Diamond User Manual

Programmable Button Sew On

Sew buttons, snaps, hooks and eyes quickly with your
machine.
: Woven medium.
FABRIC
: Woven medium and Button on the Exclusive
SELECT
SEWING ADVISOR™ feature. The feed teeth are
lowered automatically.
: Size 80 needle and the multipurpose tool to create a
USE
thread shank, as recommended. Snap off presser foot.
:
SEW
• Place fabric, multipurpose tool and button under the
ankle with the holes in the button lined up with the
swing of the needle. Check the swing of the needle
using the mirror side-to-side button to be sure the
needle will not hit the button. Adjust stitch width if
needed. Bring the needle down into the hole of the
button.
• Set the number of stitches to sew on the button (see
page 4:7). 6-8 stitches is normal.
• The machine stitches the button and automatically
ties off.
Note: Place the thin end of the multipurpose tool under the button
when sewing on light fabrics. Use the thick end for heavier fabrics.
Hold in place on the fabric with transparent tape.
Note: The recommended width of 3.0 is set for most buttons. If you
sew a tiny button or a very large coat button, decrease ( ) or increase
(+) the stitch width until the swing of the needle sews in the holes of
the button or snap.
Sewing
4:17 4:17