Load A Stitch From Another Location - Husqvarna Designer Diamond User Manual

Toolbar
On the toolbar you will nd the Start Menu icon (which
opens the Extended Start Menu), Sewing/Embroidery
Mode icon (to switch between Sewing Mode and
Embroidery Mode) and the Quick Help icon. First touch
the Quick Help icon and then something you want
information about on the screen. On the extended toolbar
you will nd Stitch Menu, Font Menu, File Manager, SET
Menu and Information in Sewing Mode. Read more about
these functions in chapter 3, Ultimate Interactive Screen.
Select a stitch
To select a stitch, touch the actual stitch in the stitch
selection area. You can go through the list of stitches,
using the arrow below the stitches. The number of the
actual subcategory is shown beside the scroll bar.
To enter a certain menu, press the extended toolbar icon
and choose stitches. A foldout menu will appear allowing
you to choose from the different menus. Some of the
menus have submenus. Touch the submenu button to
enter it.

Load a stitch from another location

Load stitches that you have saved in File Manager or
in other locations. Touch the File Manager icon on the
extended toolbar. The File Manager window will open.
Locate your stitch and Touch & Hold or touch OK to load
it.
Sewing
Start Menu
Stitch Menu
Font Menu
File Manager
SET Menu
Information
4:5 4:5