Table of Contents
Advertisement
Duplicate/ Delete Last Object
If you want to add a copy of the last object, use the
Duplicate Last Object icon. The last object in the shape
will be duplicated and the copy will be added after the last
object on the baseline.
If you want to delete the last object in the shape, touch the
Delete Last Object icon. Only the last object in the group
will be deleted.
Note: If several designs are grouped before opening Design Shaping,
the entire group will be duplicated or deleted. Duplicate and Delete
icons are not visible when shaping an embroidery text.
Design Shaping - example
1.
In Embroidery Edit, open the Design Menu and select
design DD_053.vp3 to load to Embroidery Edit.
2.
Open My Hoops and select 120 x 120 hoop.
3.
Open the Design Menu again and load DD_051.vp3.
4.
Select, then center DD053.vp3, by touching the
Control Center icon when the function Position is
active.
5.
Select DD051.vp3 and Open Design Shaping.
6.
Select the clockwise circle.
7.
Select the touch function Scale. Either touch and drag
on the screen, or use the arrows in the Control to
decrease the size to 51x51mm. The size is indicated
just above the Control.
8.
Add ve copies by touching the Duplicate last icon for
a total of six design.
9.
Close Design Shaping by touch OK in the lower right
corner. Switch to Embroidery Stitch-Out by touching
the GO! icon. Touch Start/Stop to embroider.
7:6
Embroidery Edit
Clockwise
circle
Scale
Design Shaping
Position
Duplicate
last
Advertisement
Table of Contents
