Table of Contents
Advertisement
Set Up
USB ports
Your machine has two USB ports: one to connect the
sewing machine to your computer, and one to connect
either your USB embroidery stick, optional CD-drive,
optional USB hub or optional mouse.
Note: Contact your local authorized HUSQVARNA VIKING®
dealer for USB devices for your machine.
USB embroidery stick
Your machine comes with a USB embroidery stick. Use
the stick to store designs and other les, or to move les
between the computer and sewing machine.
Connect to and remove from the USB port
Insert the USB embroidery stick or other devices in the
upper port. The USB plugs can only be inserted one way –
do not force them into the ports!
The USB PC cable packed with your machine
(P/N:412 62 59-04) plugs in to the lower port. No other
cable should be used in this port. Connect the other end of
the cable to your PC.
Note: Install the Embroidery Machine Communication CD before
connecting the machine to your PC.
To remove, carefully pull the USB embroidery stick or the
plug of the USB cable out straight.
Using the USB embroidery stick
A light at the end of the stick indicates that the USB
embroidery stick is plugged in correctly. When loading
from or saving to the USB embroidery stick, the light
ashes and an hourglass appears on the screen.
Note: Do not remove the USB embroidery stick when the hourglass is
shown on the screen or while the le manager is shown. Removing the
stick at that time can damage the les on your USB embroidery stick.
Note: The USB embroidery stick provided with the machine can be
left in the machine when putting on the hard cover. Make sure that the
cover of the USB stick is turned downwards.
2:12
Advertisement
Table of Contents
