Accessories Included - Not In The Picture; Presser Feet; Designer Diamond™ Sampler Cd - Husqvarna Designer Diamond User Manual

Accessories Included - not in the picture

• 4D™ Embroidery Machine Communication CD
• Carrying Case (attached on the machine upon delivery)
• Scissors
• Luggage style carrying bag with packing insert
• Foot control
• Power cord
• USB PC cable
• Needles
• Embroidery thread
• Pieces of fabric and stabilizer
• DESIGNER DIAMOND™ Sampler CD
• DESIGNER DIAMOND™ Sampler book
• User´s Guide
• Accessory User´s Guide
• Quick Guide - 1 for sewing/ 1 for embroidery
• Warranty card

Presser feet

7
7
7
7
7
Getting to know your machine
Utility Foot A
Decorative Stitch
Foot B
Buttonhole Foot C
Blindhem Foot D
Zipper Foot E
Non-Stick Glide Foot
H
Snapped onto the machine upon delivery. This foot is used mainly
for straight stitching and zigzag stitching with a stitch length
longer than 1.0.
For sewing close zigzag stitches (satin stitches) with less than 1.0
mm stitch length, other utility stitches or decorative stitches, use
this foot. The tunnel on the underside of the foot is designed to
feed smoothly over the stitches.
For manual buttonholes. This foot has guide lines to determine
buttonhole length. The middle measures a 5/8'' (15 mm) from the
fabric edge. The two tunnels on the underside of the foot ensure a
smooth feed over the buttonhole columns. The nger on the back
of the foot holds cording for corded buttonholes.
This foot is used for blindhem stitches. The inner edge of this
foot guides the fabric. The right toe of the foot is designed to ride
along the hem edge.
This foot can be snapped on either to the right or to the left of
the needle. This makes it easy to sew both sides of the zipper.
Move needle position to right or left to sew closer to zipper teeth
or for covering large cording.
This foot, with a non-stick coating underneath, is used when
sewing foam, vinyl, plastic, or leather to keep these materials from
sticking to the foot.
1:9