Table of Contents
Advertisement
6.
Clear suf cient space around the machine to
accommodate movement of the embroidery arm and
the hoop. Hold the needle thread and touch the Start/
Stop button or the foot control. The machine starts
embroidering.
Note: If Automatic Jump Stitch Trim is not activated the machine
will stop after stitching a few stitches. A pop-up message will appear
on the screen asking you to cut the thread end. Cut the thread and
press Start/Stop to continue embroidering.
7.
When the rst color is completed, your machine cuts
the thread end and stops. A pop-up message appears
asking you to change thread color. Re-thread with the
next color and continue embroidering by pressing
Start/Stop. Hold the thread end. The machine will trim
the top thread end and pull the thread to the underside
of the fabric.
At the end of each color block, the thread is tied off
and the needle thread is cut.
8.
When the embroidery is completed, your machine
cuts the top thread and bobbin thread and stops. The
needle and presser foot raise automatically for easy
removal of the hoop.
A pop-up message and sound informs you that your
embroidery is nished. Touch OK to clear your design
from the screen and return to Embroidery Edit. Touch
Cancel (X) to keep the design loaded and stay in
Embroidery Stitch-Out.
6:6
Embroidery Set Up
Advertisement
Table of Contents
