Usb Ports - Husqvarna Royale User Manual

2 Set Up

USB PORTS

Your machine has two USB ports: one to connect the
sewing machine to your computer, and one to connect
either your USB embroidery stick, optional USB hub or
optional mouse.
Note: Make sure that the USB stick you use has the format
FAT32.
USB EMBROIDERY STICK
Your machine comes with a USB embroidery stick. Use
between the computer and sewing machine.
Connect to and remove from the USB port
Insert the USB embroidery stick or other devices in the
upper port. The USB plugs can only be inserted one way –
do not force them into the ports!
The USB PC cable packed with your machine
(P/N:412 62 59-04) plugs in to the lower port. No other
cable should be used in this port. Connect the other end of
the cable to your PC.
Note: Install the complimentary software before connecting the
machine to your PC. See page 2:14.
To remove, carefully pull the USB embroidery stick or the
plug of the USB cable out straight.
Using the USB embroidery stick
The External Device icon in File Manager is only activate
when a device is connected to the machine USB port.
When loading from or saving to the USB embroidery stick
an hourglass appears on the screen.
Note: Do not remove the USB embroidery stick when the hourglass is
External Device icon
Note: The USB embroidery stick provided with the machine can be
left in the machine when putting on the hard cover. Make sure that the
cover of the USB stick is turned downwards.
2:13