Replacing The Photoconductor Drum - Ricoh Aficio FX10 Operator's Manual

Replacing the Photoconductor Drum
MAINTAINING YOUR MACHINE
Replacing the Photoconductor Drum
The photoconductor receives the print image before it is transferred to paper.
To ensure optimal quality, replace them every 30,000 copies.
If the following display appears, replace the photoconductor.
.-—.-.
lik.t-'i.il~f; ~~~
v
. .-, "-.-, .
III ii. FAX IW['lk:t+. 1
To check how many sheets you've printed, please refer the section titled
"Counters" (See page 60.)
Warning:
Caution:
Caution:
Caution:
Caution:
The fusing unit is very hot. Be careful to avoid touching the unit.
Do not expose the photoconductor drum to light for an extended
period.
Do not touch or scratch the drum: it cannot be repaired. Any
scratch on the drum would be reproduced on prints.
Do not touch any parts other than those specified in the proce-
dure.
Though organic photoconductor drums are safe for the environ-
ment, dispose of used drums according to local regulations.
n
El
Lift the upper unit release lever
and open the upper unit by slid-
ing it to the right.
Warning: When opening the up-
per unit, make sure nobody
nearby injures themselves on it.
m
~ ~ $(.
Slide out the toner cassette with-
out shaking it.
94