Table of Contents
Advertisement
MAINTAINING
YOUR MACHINE
Replacing the Photoconductor
Drum
El
—
..
. . .
I-lemove
the old photoconductor.
Roll up the green plates on the
old drum.
Hold the used drum by the plates
and carefully pull it out.
Caution:
Do not expose the new drum to light for an extended period of
time. Do not touch the surface of the drum.
n
A
H
With the black protective sheet
still attached, fit the photoconduc-
tor into the two slots as shown.
One end of the photoconductor
is
marked "R". This should be at the
front of the machine as shown.
Remove the black sheet.
Caution: Never touch the photo-
conductor
(green drum).
n
Push down the two green levers
1
to lock the photoconductor
in
place.
Caution: Never touch the photo-
conductor (green drum).
—1
95
Advertisement
Table of Contents
Troubleshooting
