Table of Contents
Advertisement
PC-PRINTING
Printing modes
Double click the same application
which you minimized
in step 2 and
perform the print operation. A screen asking you to enter the file name will
appear.
Enter a new file name or the same file name with the GDI extension (.GDI)
and click OK to store the file as a GDI file.
The GDI file extension must be used to designate the difference between
a GDI file and an application
file. Otherwise,
the application
file will be
overwritten
by a GDI file.
Minimize the application.
Perform steps 3 and 4 above.
Disable the "Print to File''feature by clicking off the check box.
Use the Formsetting tab to chec the "Use Print Manager", then select
"Overlay", "Cover Page" and "Trailer Page" and enter the file name.
Click "Browse". The Browse window will appear.
Double click on the directory in which you saved your graphic file(GDl
file), then select file and click "OK". The selected file will appear in a box
in the FormSetting
tab.
Click "OK" in the OfficeStyler
TI O GDI Properties window.
Cilck "OK" in the Print window.
Print the desired document, The graphic will be overlaid on the pages of
your document.
Note:
If you want to use the Overlay with 2up/4up, create the Overlay file by 2up/4up
in advance, then use it for the output of 2up/4up.
46
Advertisement
Table of Contents
Troubleshooting
