Ricoh Aficio FX10 Operator's Manual page 38

Optional Feature for Transmission FAXING
TTl
Normally, the TTl programmed in your machine is printed at the top of each of
the pages you transmit when they are received at the other end. The top of the
image will be overprinted if there is no margin at the top of the transmitted
page. In some cases, you may wish the other party to receive an unmarked
copy of your original. in this case, you can switch TTl off.
c1
El
El
Cl
A
H
Set the document and select con-
lSE-i clp-r~i]p.l '"//}
1
the right display appears.
Yes.
." ".. -.. ." . . . . . - .- . .
:jk:. I
I..jt-' \ j.
!..jpd
"'{j4b
If you wish to change the TTl set-
- -----
15ET Lv-'I ION
., "y" . i ~ }
Yes when you have finished.
Dial the fax number and press Yes. Then press Start.
Document size
If you are going to send a page that is not of a normal size, your machine may
have trouble scanning the entire page. For example, if your page is larger than
a certain size but smaller than the next size up, you should use the document
size selection feature to select the larger size. Otherwise, your machine will not
scan the outer margins of your page. This feature is only available if you send
a document placed on the exposure glass, not with the auto document feeder.
El
El
El
c1
A
36
Select the scanning area using ~
5EiT IN:'"rI UN
"y:db
and F key. Yes when you have fin-
. -----
M.. I D L.-i D
ished.
Dial the fax number and press Yes. Then press Start.