Ricoh Aficio FX10 Operator's Manual page 40

Sending the Same Message to Many Destinations FAXING
-.
I 1
a) Ten Key Pad b) Quick Dial c) Speed Dial d) Group Dial
Quick Dial
07
Example:
@@@
13ample:Speed Dial 10
Method 1 *
i~ b 'm ~'hOd~**
~
08 of the Quick Dial
10 of the Quick Dial
key and 1 of the ten
key pad,
*: This is the example of the case where Group Dial is programmed in 08 of the
Quick Dial key.
**: This is the example of the case where Quick Dial key 20 is programmed as
the Group key, and Group dial number 1 is programmed.
Programming the Quick Dial: see page 42.
Programming the Speed Dial: see page 42.
Programming the Group Dial: see page 44.
Programming the Group key: see page 46.
Note: The maximum destinations you can dial using the ten key pad is 49.
However, this limitation is up to the machine condition.
m
c! *
b
38
If you enter the wrong number,
press No or Clear and enter
again.
Clear to delete one digit.
No to delete the whole number.
Press Yes (r@ the Start key).
You'll get:
The number in the bottom right of
the display tells you which num-
ber is being currently dialed if you
specified more than one destina-
tion.
e.g. 2 means the second number
is being dialed.
Repeat steps 6 and 7 until all destinations are entered.