Ricoh Aficio FX10 Operator's Manual page 292

Generally, you'll need the following to run OmniPage Limited Edition:
• Computer with an 80386 or higher processor
• Microsoft Windows version 3.1 or higher running in Enhanced
mode, Windows 95, or Windows NT 3.5.1 or 4.0.
• Windows-compatible mouse
• VGA 640x480, 16 colors
• 6MB available hard disk space (more for multilingual versions)
Windows 3.1 Additional Requirements
• 8MB RAM
• MS-DOS 5.0 or higher
• 10MB swap file for U.S. version or 12MB swap file for the non-
U.S. version
Windows 95 Additional Requirements
• 8MB RAM
• MS-DOS 5.0 or higher
• 6MB swap file for U.S. version or 8MB swap file for the non-U.S.
version. Caere recommends that you allow Windows 95 to
manage your virtual memory.
Windows NT Additional Requirements
• 12MB RAM
• 6MB swap file for U.S. version or 8MB swap file for the non-U.S.
version.
OCR is memory intensive; the system requirements above are
minimums. The more RAM your system has, the better. In addition, you
must have enough free-disk space for temporary files. Dense, complex
pages require more disk space.
Setting up a large, permanent swap file (virtual memory) can speed text
recognition. See "How to Create a Windows 3.1 Swap (Virtual Memory)
File" on page 6 for instructions on how to set up virtual memory.
If you received your OmniPage Limited Edition as bundled software
with a scanner, the OmniPage Limited Edition installation files may be
included on the scanner software CD-ROM.
Minimum System Requirements
Setup and Installation - 4