PC-PRINTING
Printing modes
Click "Options".
Select "File Name" by clicking on the check box at the left.
An X mark appears in the check box.
Enter a new file name or the same file name with the GDI extension (.GDI)
and click OK.
The GDI file extension must be used to designate the difference between
a GDI file and an application
file. Otherwise,
the application
file will be
overwritten by a GDI file.
Click "OK".
Minimize the OfficeStyler
T1 O Printer console Window.
Double click the same application
which you minimized in step 2 and
perform the print operation.
Your created file will be stored as a GDI file.
PerForm steps 3 and 4 above.
Select "Use OfficeStyler
Print Manager" by clicking on the check box.
An X mark appears in the check box.
Click "Options".
Disable "File Name" by clicking off the check box at the left.
The X mark will be cleared from the check box.
Click Overlay.
The Overlay Options window is displayed.
Click on the desired selection(s).
For example, select Print Cover Page.
54