Changing The Order Of Print Jobs - Ricoh Aficio FX10 Operator's Manual

OfficeStvIer T1 O Printer console
PC-PRINTING
Changing the order of print jobs
Both Servers and Clients support drag-and-drop jobs within the Local Queue
to change the job order in the print queue. Drag-and-drop is available for jobs
that have not started printing. To drag-and-drop, perform the following steps:
c1
H
El
c1
A
H
n
1
El
n *
o
El
I
Place the mouse cursor at the beginning of the print job you want to select.
Press the left mouse button and hold down.
While holding the left mouse button down, move the mouse.
As you move, print jobs will be highlighted.
Move the mouse to the end of print job you want to select.
Release the left mouse button.
The print job will remain highlighted.
Return the mouse cursor to the beginning of the selection.
Note the l-bar cursor turns into an arrow when the cursor is in the
highlighted area.
Depress and hold the left mouse button and hold down.
While holding the left mouse button down, move the mouse arrow to the
place you wish to drop the selected print job(s).
Release the mouse button.
27