Ricoh Aficio FX10 Operator's Manual page 315

Possible Remedies for Users of Windows 3.1
• Have the system configuration files (
FRQILJV\V
Installing a new application program may have modified these
files in such a way that they will no longer work with OmniPage
Limited Edition. (To determine the last time they were modified,
check the date and time displayed by the DOS
• Did you recently install a new Windows 3.1 application?
If so, it may have changed the EMMSize parameter in the
V\VWHPLQL
should be left blank:
• Have you installed memory-resident application programs that
take up too much memory or conflict with Windows operation?
Or, have you loaded other Windows programs that are leaving
too little memory free for proper operation of Windows and
OmniPage Limited Edition?
• From the Windows 3.1 Program Manager, choose About Program
Manager from the Help menu to determine the mode in which
Windows is operating and the amount of available memory.
Windows 3.1 should be running in Enhanced mode and report at
least 6 MB (9 MB is preferred) of free memory. Consult the
installation and configuration information included with
Windows to determine how to correct any problems.
Choose About Program Manager from the Windows Program
Manager Help menu to check the amount of free memory.
Check the virtual memory size within the Windows Control
Panels and make sure there is at least 6 MB (9 MB is preferred).
If OmniPage Limited Edition has Stopped Working
) been modified recently?
file. For proper operation, the EMMSize parameter
(006L]H
DXWRH[HFEDW
and
GLU
command.)
Troubleshooting and Support - 27