Ricoh Aficio FX10 Operator's Manual page 316

Possible Remedies for Users of Windows NT
• Did you attempt to install OmniPage Limited Edition while
operating at the User group level?
If you are in an organization that has a MIS (network and
technical services department), ask them to install OmniPage
Limited Edition at the Admin user level. OmniPage Limited
Edition will not install at the User group level, which is an
intentional safeguard of Windows NT.
• Have the system configuration files (
FRQILJV\V
Installing a new application program may have modified these
files in such a way that they will no longer work with OmniPage
Limited Edition. To determine the last time they were modified,
check the date and time displayed by the DOS
• Did you recently install a new Windows 3.1 application?
If so, it may have changed the EMMSize parameter in the
V\VWHPLQL
should be left blank:
• Have you loaded other Windows NT programs that are leaving
not enough memory free for proper operation of OmniPage
Limited Edition?
Within the System Settings in the Control Panel, check the
amount of free memory (RAM). Under Performance, increase
the default amount of memory or allocate more disk space.
Check the virtual memory size within the Windows Control
Panels and make sure there is at least 6 MB (9 MB is preferred).
• Check the disk space used on the volume that has Windows NT
installed. If your volume is close to being full, you will have
difficulties. Free some space.
If OmniPage Limited Edition has Stopped Working
) been modified recently?
file. For proper operation, the EMMSize parameter
(006L]H
DXWRH[HFEDW
and
GLU
command.
Troubleshooting and Support - 28