Table of Contents
Advertisement
Setm
OfficeStyler
T1O Control
Panel
H
El
n
A
Click on the Night Timer (Energy
Saving) tab.
Make sure the Power Saver
Timer
checkbox is checked,
If it is not, click
it to turn power saving on.
Program the times when you want the heater to turn on and off for each
day of the week.
ExamD/e
Imagine
an office open Monday
to Friday, 9 in the morning
until 6 in the
evening. Typically, the timer could be programmed
to turn the heater on at 9
AM and switch it off at 6 PM on weekdays,
while leaving the heater off at the
weekend when nobody is using the machine.
The Night Timer setup would look like:
c1
Cl
IJ
El
North American versions do not use the 24 hour clock. In this case, use the
12 hour format.
To keep the heater on all day, set both timers to On at 12.00 (AM).
To keep the heater off all day, set both timers to Off at 12.00 (AM).
If you are happy with these settings, choose "OK". If not, choose "Cancel"
to reject any changes you have made.
75
Advertisement
Table of Contents
Troubleshooting
