Ricoh Aficio FX10 Operator's Manual page 120

Error Codes
Troubleshooting
Code
Possible Cause
0-21
Same as for code 0-04
0-22
Poor line condition, Ask the other party to resend,
O-23
Same as for code O-22
0-24
Memorymay be full or there maybe a problem with
your printer, (jam
need to add paper or toner). Clear memory or solve the problem with your
printer. If the memory was not full, substitute reception may have been
disabled. See page 31
0-70
There is a problem with the machine at the other end.
1-00
Document jam, improperly inserted document
1-01
Document length exceeded the maximum limit, or as for code 1-00
2-xx
Possible fault in your machine
4"00
The page took too long to send. Send again at a lower resolution, or
without halftone. The phone line may be bad.
4-01
There is a bad line. Your phone line maybe disconnected.
4-02
The received page was too long.
4-10
Other party may be using ID codes. Ask the other party to avoid ID codes.
5-20,5-21
Insufficient memory to receive the message. When the pages in memory
have been printed, ask the other party to resend.
5-25
Your machine has a problem.
6-01,6-02
Poor line condition or a problem with your machine
6-05,6-06
Poor line condition, or a problem with the fax machines
6-08
A problemwith the machineat the other end
6-09,6-10
A problem with the machine at the other end or with yours machine
9-07
Copy jam at the cassette entrance
9-08
Copy jam inside the machine
9-09
Copy jam at the feed-out area