Ricoh Aficio FX10 Operator's Manual page 280

TROUBLESHOOTING
PC-PRINTING
The paper is jammed.
Clear the cause of the paper jam.
Note:
In this case, the data to be printed are kept in the Resume Wait State in the
PC.From the application, either resume the printing operation or terminate it.
The cover was opened during printing.
Close the cover completely.
The machine is out of paper.
Set paper in the machine.
The paper size setting in the machine does not math the actual paper
size.
Set the paper size to match the actual paper size.
The print density is not as
expected.
If the density is set on the machine, it will not be valid, so set it in the printer
driver in the PC.
If the TonerSaver function is activated in the printer driver in the PC, check the
contents of that setting again.
Blank paper was output.
If no toner cartridge is loaded, load a toner cartridge.
When printing on both sides of a sheets, several sheets may
be fed through together.
Feed one sheet at a time.
The printer stopped.
Make sure no other function is being executed, then press the stop key
continuously for three seceonds.
Other
PC printing cannot be stopped using the Stop key on the machine. Stop
printing from the printer driver in the PC.
114