Ricoh Aficio FX10 Operator's Manual page 300

OmniPage Limited Edition scans the page and displays it in the
preview area.
Zones and Zoning Techniques
OmniPage Limited Edition automatically draws a single zone around
the entire page area. You might want to select a new zone or resize the
existing zone to omit unwanted information or graphics.
• To resize the zone, drag any of the four side handles. You can
resize the zone vertically and horizontally of the zone box. When
abc
you resize a zone, your cursor will change to a plus sign with
"abc" in the lower right quadrant. You can also drag any corner-
zone handle to simultaneously change the zone's vertical and
horizontal dimensions.
• To adjust the size of your acquired image, select the pull-down
menu in the toolbar. You can view the image at various
magnifications. Or, you can select Zoom in the View menu.
• To move the zone, place your cursor inside the zone. The cursor
will change to a four-way arrow. Click and drag the zone, which
will keep its size, to a new location.
• To delete the zone, press the Del key.
• To draw a new zone, point your "abc" cursor at one corner of a
new intended zone, and click and drag a box around the area you
abc
want to recognize.
• To rotate a zone in 90-degree increments clockwise or counter-
clockwise, click the Rotate button and press the left-mouse button
for counterclockwise rotation or the right-mouse button for
clockwise rotation.
Scanning Text Directly from OmniPage Limited Edition - 12
Scan a Page