Event Reception - Brocade Communications Systems Brocade 8/12c User Manual

9. By default, all traps are listed in the Available Traps list, under the folders for the MIB to which
10. After limiting the list of available traps, expand the MIB folder to which the trap you want
11. Click OK.

Event reception

The Event Reception feature provides an interface to add the credentials and community strings
required to decode traps. You can use the Event Reception dialog box to configure the trap
message, severity, and alias name that is used by the Event Processor.
The Event Reception dialog box contains two tabs:
•
•
To access the Event Reception dialog box, select Monitor > SNMP > Event Reception.
The Event Reception dialog box displays.
Brocade Network Advisor SAN User Manual
53-1002167-01
•
Warning
•
Notice
•
Info
•
Debug
Traps with the selected severity and those with higher severity levels are forwarded. For
example, by default, Critical severity is selected. Therefore, traps with Critical, Alert, and
Emergency severity levels are forwarded. To have all traps forwarded, select Debug, the lowest
severity level.
they belong. You can limit the list by selecting one of the following MIB types:
•
MIB Information - click the check box if you want the default SNMP name for the traps to
be displayed.
•
MIB Alias - click the check box if you want the aliases for traps to be displayed.
belongs under the Available Trap Type list and select that trap. Click the right arrow button to
move it to the Selected Trap Type list.
The Trap Credentials tab allows you to configure the server to accept or drop SNMP traps and
add SNMP credentials and community strings for decoding traps.
The Trap Configuration tab allows you to customize the trap description or message, severity,
and alias name.
30
SNMP traps
855