20
Disabling FCIP tunnels
For the 8 Gbps Extension Switch and the 8 Gbps Extension Blade:
1. Select Edit.
2. Select a circuit that you want to edit from the Circuits properties table at the bottom of the
3. Fields and parameters are as described in
Disabling FCIP tunnels
1. From the FCIP Tunnels dialog box, select the tunnel you want to disable.
2. Select Disable.
3. Click Yes to disable the tunnel.
664
The Edit FCIP Circuit dialog box displays.
The Edit FCIP Tunnel dialog box displays.
dialog box and select Edit.
The Edit FCIP Circuit dialog box displays
FIGURE 300
Edit FCIP Circuit dialog box
fields and parameters.
A confirmation dialog box displays showing the switches on both ends of the tunnel and tunnel
number.
(Figure
300).
"Adding an FCIP
circuit". You can edit all editable
Document Title
xx-xxxxxxx-01