Fcoe Licensing; Save Running To Startup; Copying Switch Configurations To Selected Switches - Brocade Communications Systems Brocade 8/12c User Manual

14

FCoE Licensing

FCoE Licensing

The FCoE license enables Fibre Channel over Ethernet (FCoE) functionality on the 8 Gbps 8-FC port,
10 GbE 24-DCB port Switch. Without the FCoE license, the 8 Gbps 8-FC port, 10 GbE 24-DCB port
Switch is a pure L2 Ethernet switch and will not allow FCoE bridging capabilities.
With the FCoE license, the FCoE Configuration dialog displays virtual FCoE port information and
enables you to manage the virtual port information. The topology displays directly-connected
converged network adapters (CNAs) and the Properties dialog for the virtual FCoE port details.
Without the FCoE license, the virtual FCoE port displays in the device tree, but you cannot enable,
disable, or view virtual FCoE port information.

Save running to startup

The Save running to startup dialog box lists discovered DCB switches with Fabric OS version 6.3x
firmware or higher. You can select available switches and move them to the Selected Switches
table. Upon startup, the DCB switch configuration is copied to the selected switches.
NOTE
This dialog box launches if there is at least one DCB switch discovered. If no DCB switches exist, a
warning dialog displays.

Copying switch configurations to selected switches

1. To access the Save running to startup dialog box, select Configure > Configuration > Save
336
Running to Startup from the menu bar.
The Save Running to Startup dialog box displays.
FIGURE 116
Save running to startup dialog box
Brocade Network Advisor SAN User Manual
53-1002167-01