Opening the DCB Configuration dialog box
Launch the DCB Configuration dialog box using one of the following methods:
•
•
•
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
NOTE
The Protocol Down Reason column displays the values only for the external ports of embedded
platforms but not for the internal ports.
FIGURE 117
Minimum DCB configuration for FCoE traffic
You must complete the following procedures to create the basic configuration of DCB for FCoE
traffic.
This section is applicable for the following Fabric OS (FOS) versions: 6.3.0, 6.3.1, 6.3.2, 6.4.1, and
6.4.2. This section is not applicable for FOS versions 6.3.1_dcb, 6.3.1_cee, 6.4.1_fcoe, or 7.0.0.
NOTE
The first two procedures in this section can be completed as a single procedure. They were broken
into two separate procedures for clarity.
Brocade Network Advisor SAN User Manual
53-1002167-01
Select Configure > DCB from the menu bar.
Right-click the DCB switch from the device tree, and select Configure > DCB.
Right-click the DCB switch from the topology map and select Configure > DCB.
DCB configuration dialog box
14
Switch policies
339