Syslogs; Adding A Syslog Recipient - Brocade Communications Systems Brocade 8/12c User Manual

5. If the trap has been customized, a button labeled Default is availab.e. Click Default to revert

Syslogs

Use the Options dialog box to automatically register the Management application server as the
syslog recipient on all managed SAN and IP products. The syslog listening port number is 514 by
default. If you change the port number from 514, auto-registration is disabled.

Adding a syslog recipient

1. Select Monitor > Syslog Configuration > Product Syslog Recipients.
2. Select Add from the Action list.
3. Enter the IP address of the syslog port (the recipient server) in the Recipient IP Address field.
4. Enter the syslog port of the recipient in the Recipient Port field. The default value is 514. Valid
5. Select the fabric or switches from the Available list and click the right arrow button to move it to
6. Click OK.
Brocade Network Advisor SAN User Manual
53-1002167-01
the previous changes to its default.
The Syslog Recipients dialog box, shown in
FIGURE 380
Syslog Recipients dialog box
This is a mandatory field. IPv4 addresses are accepted but a DNS name is not accepted.
numeric values range from 1 through 65535.
the Selected list. You can select multiple products.
NOTE
For IP products, only switches are available to select.
The Management application registers the recipient IP address as a syslog recipient.
Figure 380, displays.
30
Syslogs
863