Brocade Communications Systems Brocade 8/12c User Manual page 906

30
SNMP traps
6. When you have finished, click OK to accept your entries.
Unregistering a registered trap
You can unregister only the traps that you have registered. You cannot unregister traps that come
with the Management application by default. Perform the following steps if you want to unregister a
trap that you registered.
1. Select Monitor > SNMP Setup > Event Reception.
2. Click the Trap Configuration tab.
3. Click the Registered button.
4. Expand a MIB folder to display the traps that have been registered for that MIB.
5. Select a trap to display its current definition.
6. Click the Unregister Trap button.
7.
Customizing a registered trap definition
Perform the following steps to modify the definitions of registered traps.
1. Click the Trap Configuration tab.
2. Click the Registered button.
3. Expand a MIB folder to display the traps that have been registered for that MIB.
4. Select a trap to display is current definition. You can change the severity, message, or alias of
5. When you have finished, click OK or Apply to accept your entries.
Reverting the customization of a registered trap to default
Perform the following step to revert to the default definitions of registered-customized traps.
1. Click the Trap Configuration tab.
2. Click the Registered button.
3. Expand a MIB folder to display the traps that have been registered for that MIB.
4. Select a trap to display its current definition.
862
The status of the trap changes to Registered - Customized and the trap appears in the Event
Log.
The Trap tree displays the MIBs that contain the registered traps.
Click OK.
Once unregistered, the status of the trap changes to Not Registered.
The Trap tree displays the MIBs that contain the registered traps.
the trap.
If you modified a default trap, its status changes from Registered - Default to Registered -
Customized.
The Trap tree displays the MIBs that contain the registered traps.
Brocade Network Advisor SAN User Manual
53-1002167-01