Unblocking Ports - Brocade Communications Systems Brocade 8/12c User Manual

10
Port Auto Disable

Unblocking ports

NOTE
The device must be running Fabric OS 6.3 or later.
To unblock ports, complete the following steps.
1. Select Configure > Port Auto Disable.
The Port Auto Disable dialog box displays.
2. Select the fabric on which you want to enable port auto disable (PAD) from the Fabric list.
3. Select Blocked Ports from the Show list.
4. Click Unblock.
5. Click OK on the Port Auto Disable dialog box.
292 Brocade Network Advisor SAN User Manual
53-1002167-01