14
QoS configuration
Deleting a traffic class map
1. Select Configure > DCB from the menu bar.
2. Select a switch, and click Edit.
3. Click the QoS tab on the Edit Switch dialog box.
4. Select a Traffic Class Map that you want to delete from the Traffic Class Maps table.
5. Click the left arrow button.
6. When you have finished the configuration, click OK to launch the Deploy to Products dialog
7.
8. Click Start on the Deployment Status dialog box to save the changes to the selected devices.
Assigning a traffic class map to a port or link aggregation group
You can assign a Traffic Class map to a port or ports under the LAG; however, a port does not
require a Traffic Class map be assigned to it. A port can have either a DCB map or a Traffic Class
map assigned to it, but it cannot have both.
NOTE
You cannot configure QoS or LLDP-DCBX on a LAG.
1. Select Configure > DCB from the menu bar.
2. Select a port or LAG, and click Edit.
3. Click the QoS tab on the Edit Switch dialog box.
358
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
The QoS dialog box displays.
The selected DCB Map row is removed from the table.
box.
Click OK after changing the attributes of the current deployment.
The Deployment Status dialog box launches.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
The QoS dialog box displays.
Brocade Network Advisor SAN User Manual
53-1002167-01